CDA RC 9020 installation instructions Automatic oven cooking

Automatic oven cooking

To cook food automatically in the oven, it is necessary to:

1.Set the length of the cooking time 2.Set the end of the cooking time 3.Set the temperature and the oven

cooking programme.

These operations are done in the following way:

1.Set the length of the cooking time by

pushing the button and the

button to advance, or to go back if you have passed the desired time (fig. 8). The AUTO and the

symbol will be on.

2.Set the end of the cooking time by

pressing the button (the cooking time already added to the clock time

will appear), and the button (fig. 9); if you pass the desired time you may get back by pushing the button.

After this setting, the symbol will go off. If after this setting, the AUTO flashes on the panel and a buzzer goes off, it means there was an error in the programming.

In this case, modify the end of cooking time or the cooking time itself by following the above instructions again.

A

U

T

O

Fig. 8

3.Set the temperature and the cooking programme by using the switch and thermostat knobs of the oven (see specific chapters).

Now the oven is programmed and everything will work automatically, that is the oven will turn on at the right moment to end the cooking at the established time.

During cooking, the symbol remains on.

By pushing the button you can see the time that remains until the end of cooking.

The cooking programme may be cancelled in any moment by pushing . At the end of the cooking time the oven will turn off automatically, the symbol will turn off, AUTO will flash and a buzzer will sound, which can be turned off by pushing any of the but- tons.

Turn the switch and thermostat knobs to zero and put the programmer onto

“manual” by pressing the button.

Attention: A power cut makes the clock go to zero and cancels the set programmes.

After a power cut three zeroes will flash on the panel.

A

U

T

O

Fig. 9

9