CDA RC 9020 installation instructions Burners, Triple ring burner

Burners

They can be removed and washed only with soapy water.

Detergents can be used but must not be abrasive or corrosive.

Do not use abrasive sponges or pads. Do not put in dishwasher.

After each cleaning, make sure that the burner-caps, as well as the burners, have been well wiped off and CORRECTLY POSITIONED.

It is essential to check that the burner flame distributor F and the cap C has been correctly positioned (see fig. 20) - failure to do so can cause serious prob- lems.

Check that the electrode “S” (fig. 20) is always clean to ensure trouble-free spark- ing.

C

F

S

Fig. 20

Note:

The electrode “S” must be very carefully cleaned.

To avoid damage to the electric ignition do not use it when the burners are not in place.

Triple ring burner

The triple ring burner must be correctly positioned (see figs. 21-22); the burner rib must be enter in their logement as shown by the arrow.

The burner correctly positioned must not rotate (fig. 22). Then position the cap A and the ring B (fig. 22).

A B

Fig. 21

Fig. 22

26