CDA RV 700 Electrical feeder cable connection, Feeder cable section type H05RRF, L1 N

Electrical feeder cable connection

To connect the feeder cable to the cooker it is necessary to:

–Remove the 2 screws that hold shield A behind the cooker.

–Open completely the cable clamp D.

–Insert the feeder cable into the cable save P. The supply cable must be of a suitable size for the current require- ments of the appliance; see the section “Feeder cable section”.

–Connect the phase and earth cables to terminal B according to figures 45 and 46.

–Pull the feeder cable and block it with the cable clamp D.

–Re-mount shield A.

N.B. The earth conductor must be left about 3 cm longer than the others.

Feeder cable section type H05RRF

230 V 3 x 2,5 mm2 (**)

(**)– Connection with wall box connection.

	230 V
	L1 N		PE
		(L2)
PE	Earth
N	Neutral
L	Live			Fig. 46

B

A

D

P

Fig. 45

45