Celestron 72212 specifications System requirements, Installation of driver, Erasing Pictures

(Play back mode)

Press the Menu button , select "Play Back" and press OK button.Use

Up-Down button to select the pictures, press OK button to display the picture in full screen. Press the Shutter button again to return to a menu of nine thumbnail images.

MEMU

Play back

Auto shutter

Setting

Power off

Erasing Pictures

Press the delete button while the thumbnail menu or full-screen image is displayed. Select "Erase one" and press OK Button to erase a single frame. Select "Erase all" and press OK button to erase all frames.

ERASE	ONE ERASE	ERASE	ERASE ALL
One erase	Yes	One erase	Yes
Erase all	No	Erase all	No

Auto shutter mode(Timer)

Press the Menu button and select "Auto Shutter". Press the OK button again to take an image automatically after 10 seconds.

MEMU

Play back

Auto shutter

Setting

Power off

(Setting mode)

Press the Menu button and select "Setting". Press the OK button again to enter the menu.

MEMU

Play back

Auto shutter

Setting

Power off

P.6

6.System requirements

6-1.Windows 98SE / 2000 / ME / XP 6-2.Pentium 233MHz or higher 6-3.128MB SDRAM

6-4.Video(VGA) Card with 2MB of RAM for minimum 16-bit(High Color)display. 6-5.CD-ROM

6-6.USB port

6-7.600MB of free hard disk space.

Installation of driver

Since VistaPix is a Mass Storage Device you can access captured images just as

if it were a hard drive, therefore no software driver is needed (See Mass Storage

Mode ).If using VistaPix with an older version of Windows 98SE it may be

necessary to install the software Driver.

AB

VistaPix PC with USB port

P.11