Centro 85-1620-6 manual Fig. a

C O N N E C T I N G Y O U R G R I L L T O T H E

N A T U R A L G A S S O U R C E

1.A professionally-installed shut-off valve between the supply piping and the socket is recommended, but not required, by the National Fuel Gas Code. Socket connection must be made outdoors.

2.Coat the gas supply pipe nipple with gas resistant dope or Teflon tape.

Screw socket onto gas supply pipe (house gas source) as shown in Figure A below, and wrench-tighten.

 C A U T I O N 

The quick disconnect socket should never be connected to the grill.

Direction of gas flow is indicated on the socket.

Fig. A

Quick disconnect socket House piping

3.Pull back the sleeve on the quick disconnect socket and insert the unattached end of the gas hose into the socket. Release the sleeve and continue pushing the hose into the socket until the sleeve snaps into the locked position. See Figure B.

Fig. B

Gas hose Sleeve

2