ENGLISH
Stroller Right |
| Stroller Left |
| ||
Side |
| |
|
| Side |
❃Lock Footrest:
1 Push footrest down so that frame tube is centered between three
(3) tabs on bottom of footrest and snaps into place.
Tabs
❃Rear Wheel Assembly:
1 Remove axle protectors from ends of axle and discard.
❃Opening Stroller:
1 Stand stroller upright and pull tab up to release latch.
2 Rotate brake lever to the unlocked | Brake Lever |
position and slide wheel onto each |
|
end of axle rod with brake ribs |
|
facing in. |
|
Brake Ribs 
3 Attach wheel to axle:
•Snap wheel retainer onto grooved end of axle. Make sure large end of wheel retainer is towards wheel.
•Snap wheel retainer cap over wheel retainer.
2 Spread handle and rear legs until both fold locks “click” into position.
❃Front Wheel Assembly:
1 Hold swivel wheel assembly upright (tab pointing down).
Hub | Retainer | Wheel |
|
Cap |
| ||
Cap |
| ||
| Retainer | Wheel | |
|
| ||
|
|
|
CAUTION:
-Failure to install retainer cap may cause wheels to come off of stroller.
-After wheel assembly is complete, pull on wheels to check that they are locked into place.
•Line up hub cap tabs with slots in wheel and snap hub cap into place.
3
2 Tilt stroller slightly back and push wheel assembly up onto leg until it locks in place.
Repeat steps 1 & 2 for opposite leg.
.
CAUTION: After wheel assembly is complete, pull on wheels to check that they are locked into place.
|
| WARNING |
Tab | Prevent possible choking hazard: discard axle | |
|
| protectors and polybag which contained rear wheel |
|
| parts. |