ENGLISH
❃To Remove Car Seat Adapter:
WARNING
STRANGULATION HAZARD! Remove car seat adapter BEFORE using as a stroller seat.
1 Squeeze tab in adapter bracket to unlock bracket.
2 Pull adapter bracket out of handle grip opening.
Repeat for opposite side.
3 Lift car seat adapter away from stroller frame.
Store car seat adapter for future use.
❃Canopy Positions:
1 Canopy has three (3) positions:
❃To Attach Napper Bar:
(Stroller can be used with or without Napper Bar.)
1 Align napper bar (flat side down) with slots in lower part of handle bracket.
2 Push napper bar into slots. Pull napper bar to be sure it is locked.
3 To remove: push buttons on fold lock and pull napper bar out
❃ Seat Back Positions:
•Seat back has two (2) positions: - Upright
-
1 For upright position: Lift seat back forward until seat back pins hook into seat back latches.
CAUTION: Be sure seat back is latched onto seat back pins by pushing down on seat back.
2 For
5
Closed | Halfway Opened | Fully Opened |
| (for use with | (for use as |
| car seat) | stroller only) |
WARNING
Prevent serious injuries:
• Make sure child is clear of any moving parts when adjusting stroller.
• DO NOT place parcels on top of canopy.
❃To Secure Child:
WARNING
Avoid serious injury from falling or sliding out:
• Always use seat belt to restrain child, even when sleeping.
• To prevent child from standing or sliding out of stroller, be sure waist strap is always SNUG and on child.
• Periodically check waist strap to be sure it is snug around child’s waist.
1 Secure child with harness system.
• Pull waist straps around child’s waist 
and place crotch strap between 
child’s legs.
• Snap both buckle tongues into buckle on crotch strap.
• Pull on waist straps to be sure they are buckled and snug.
2 Adjust length of waist straps by loosening or tightening as shown. Double check to make sure strap does not slip out of buckle tongues.
Buckle Tongue