SPECIAL INFORMATION
❃Folding and Storing:
1 Step down on brake lever to lock brakes.
2 Remove car seat from stroller frame (see page 4).
NOTE: Car seat adapter may remain on stroller when folding.
3 Place seat back in its most reclined position.
4 Release fold locks on each side by grasping handle grips and pressing on both buttons.
NOTE: This can be done with the napper bar attached.
5 Continue pushing buttons and lift handle to fold stroller.
❃Folding and Storing continued:
IMPORTANT:
• When folding stroller, turn stroller front wheels to straddle frame.
• DO NOT allow front wheels to rest on frame. Doing so will cause wheels to warp and they will not roll correctly.
6 Engage latch on side of stroller to
retain stroller in folded position.
MAINTENANCE
Cleaning:
•Wipe fabric and frame with damp cloth and mild soap. DO NOT USE abrasives, solvents, strong detergents, or household cleaners; they can weaken plastic.
•DO NOT machine wash or dry seat pads that have boards in them.
•Comfort pad is removable and machine washable. Machine wash in cold water, machine dry on cool setting to prevent shrinkage. DO NOT wash with other clothes.
•When replacing comfort pad, make sure harness straps are threaded correctly through slots in comfort pad.
•Loop front of comfort pad over leg rest and fasten tabs.
WARNING
To avoid serious injury to child, periodically check anchoring straps beneath seat pad to ensure they are secured to frame.
❃Dented Wheels:
Sometimes wheels become “dented” from shipment or normal use. You may try the following procedure for repairing the dented wheel before calling our Consumer Relations Department.
•Blow warm air from hair dryer over dented area for 1 to 3 minutes.
ENGLISH
6