❃ To Attach Car Seat Adapter: | ❃ To Attach Car Seat continued |
1 Step down on brake lever to lock | 3 Push in red button on each handle |
brakes. | hub and rotate handle back until |
| it “clicks” and locks just behind |
| car seat. |
| Red Button |
ENGLISH
2 Release both levers on sides of seat back.
NOTE: Stroller seat back MUST be in reclined position to use car seat adapter.
3 With release handle of car seat adapter facing away from stroller, align both sides of adapter bracket with top of stroller handle grip buttons.
4 Rotate adapter bracket into handle grip opening and snap into place.
Repeat for opposite side.
Pull on adapter to be sure adapter is locked.
❃ To Attach Car Seat:
1 Step down on brake lever to lock brakes.
2 With car seat facing stroller handle and stroller canopy in closed position, place round car seat handle hubs into curved slots of car seat adapter. Both sides must
“click” into position.
4 Pull up on both handle hubs to be sure car seat is locked in car seat adapters.
NOTE: Car seat comes with a level indicator which is used for vehicle installation only.
WARNING
Avoid serious injuries from falls. Be sure:
•Harness straps are used to restrain child.
•Car seat handle is in locked carrying position when lifting or carrying child.
•Car seat is locked into adapter before each use.
•Stroller is fully set up and locked before using.
•Brakes are locked when attaching and removing car seat from stroller frame.
❃To Remove Car Seat From Stroller:
1 Step down on brake lever to lock brakes.
2 Push red buttons on car seat handle and rotate handle up until it “clicks” into the locked carrying position (upright).
Do not lift car seat from car seat adapter until you have checked that handle is locked.
3 Pull release lever and lift car seat out of car seat adapter.
Release Lever 
4