OPERATIONS and ADJUSTMENTS

1

2

Harness Straps (fig. a):

4 Recline / Upright Positions:

• To tighten: Pull lower belt tab.

Rear-facing- MUST use Reclined (#1) or

• To loosen: Pull and hold upper belt tab

Semi-reclined (#2) position.

Forward-facing - MUST use Semi-upright (#3)

while pulling harness straps out.

 

or Upright (#4) position.

Harness Tie:

• Squeeze lever located under front (fig. b)

• To open: Press tab and pull apart.

or rear (fig. c) of car seat.

 

3

•To close: Snap halves together. Make sure harness tie is locked by pulling out on each half.

Buckle:

•To buckle: Insert both tongues into buckle. Pull up on tongues to be sure they are locked.

•To unbuckle: Press red button and pull tongues out of buckle.

•Move car seat to desired position by aligning pointer to desired position.

Be sure car seat locks into position.

Harness straps MUST move freely. Make sure harness straps are not pinched between lever and car seat shell.

12