OPERATIONS and ADJUSTMENTS (continued)

7Changing Harness Strap Slots: A Loosen harness straps:

Pull and hold upper belt tab.

Pull harness straps out.

BRemove both harness strap loops from Splitter Plate on back of car seat.

CChange harness strap slots.

Make sure harness straps are threaded through matching slot of seat pad and car seat.

It may be necessary to remove seat pad from top of car seat.

D Re-attach harness strap loops to Splitter Plate (fig. e):

•For Infants or Small Toddlers:

Put Top right strap loop on Splitter Plate first, then attach Top left strap loop.

NOTE: Make sure ends of straps are in front of Splitter Plate as shown.

•For Toddlers:

Put Bottom right strap loop on Splitter Plate first, then attach Bottom left strap loop.

NOTE:

•Make sure both strap loops are securely attached within Splitter Plate hook.

•Make sure strap is NOT twisted and is routed between adjuster lever and car seat shell (fig. f).

14