Inspire Electric Fireplace
Operating Instructions
Heater Operation
The heater is operated by the remote control handset. A master ON/OFF switch is located under the appliance on the left hand side. This is used to turn the appliance completely off.
All further operations are controlled by using the remote control handset. (Fig. 5)
1.Ensure the appliance is plugged in and switched on.
2.To turn the fire on, press the fire on/flame effect but- ton.
3.For low heat, ensure the flame effect is on and press the low heat button once. To turn the low heat off, press the low heat button a second time. The fire will now be running with flame effect only.
4.For high heat, ensure the flame effect and low heat settings have been switched on. Press the high heat button. The high heat button will only work if the flame effect and low heat have already been switched on. To turn high heat off, press the high heat button a second time. The fire will now be run- ning with low heat.
5.To place the fire in a standby mode at any time, press the fire off button.
Fire On/Flame
Effect Only
Fire Off
Low Heat | High Heat |
On/Off | |
| On/Off |
FP1639
Fig. 5 Remote control handset.
Switch | Marking | Operation |
Master ON/OFF | O I | On/Off. Depress to I, |
|
| this supplies power to the |
|
| appliance and places it in |
|
| a standby mode. |
Frequency Setting Information
Dial Set | Switch Set |
A | ON/ON/ON/ON |
B | ON/ON/ON/OFF |
C | ON/ON/OFF/ON |
D | ON/ON/OFF/OFF |
E | ON/OFF/ON/ON |
F | ON/OFF/ON/OFF |
G | ON/OFF/OFF/ON |
H | ON/OFF/OFF/OFF |
I | OFF/ON/ON/ON |
J | OFF/ON/ON/OFF |
K | OFF/ON/OFF/ON |
L | OFF/ON/OFF/OFF |
M | OFF/OFF/ON/ON |
N | OFF/OFF/ON/OFF |
O | OFF/OFF/OFF/ON |
P | OFF/OFF/OFF/OFF |
|
|
Example of Frequency Setting
ON
1 | 2 | 3 | 4 |
Switch Set = ON ON OFF ON
Dial Set = C
NOTE: The frequency setting of the RF transmitter label affixed on the lower left front of the unit must match the dial setting on the rear of the remote control handset.
8 | 10009472 |
