CFM Corporation ICVCEFP01 manual Maintenance, Inspire Electric Fireplace, Light Bulb Replacement

Inspire Electric Fireplace

Maintenance

WARNING

Always disconnect the fireplace from the main power supply before performing any routine main- tenance. Always utilize a qualified technician if assistance is required.

Always install genuine CFM Corporation replace- ment parts, which are available from your autho- rized dealer.

NOTICE

Always use the recommended 20 watt compact fluorescent light bulbs. Never install incandescent light bulbs in this fireplace.

It is advisable to use genuine CFM Corporation replace- ment parts available from your authorized dealer.

Light Bulb Replacement

1.Disconnect the appliance from the main power sup- ply.

2.Remove the decorative trim assembly.

3.Remove the pebbles and ember bed.

4.Remove the removable panel by unscrewing the four

(4) screws. (Fig. 6)

5.Remove the colored filter from the bulb and unscrew the bulb from its housing. (Fig. 7)

6.Install the new 20W light bulb.

7.Reassemble in reverse order.

CAUTION

Glass Information

1.Never strike or slam the glass.

2.Never use abrasive cleaners to clean the glass.

3.Never attempt to operate this fireplace if any glass component is broken.

4.Always utilize a qualified service technician to re- place broken glass components and always install genuine CFM Corporation tempered glass replace- ments, which are available from your authorized dealer.

Care and Cleaning

Always disconnect the appliance from the main power supply and allow to cool before any cleaning operation.

Metal painted parts may be cleaned using a clean, damp cloth. Never use any abrasive cleaners and chemical agents as these may damage the paint finish. Cleaning of the screen diffuser is to be done using only water and a lint free cloth. DO NOT use any abrasive household cleaners as these products will damage the diffusing screen.

Removable Panel

Remove Screws FP1640

Fig. 6 Removable panel.

Light Bulb		Light Bulb
	Color Film	FP1643

Fig. 7 Remove color film and remove light bulbs.

Service

Always disconnect the appliance from the main power supply and allow it to cool before any servicing opera- tion.

The motors used on the fan heater and flame blower are pre-lubricated for extended bearing life and require no further lubrication. However, periodic cleaning/vacu- uming of the appliance and around the air intake and exhaust is recommended.

10009472 9