Carton Inventory
Your garage door opener is packaged in two cartons which contain the motor unit and the parts illustrated below. Note that accessories will depend on the
model purchased. If anything is missing, carefully check the packing material. Parts may be stuck in the foam. KEEP THE FOAM INTACT (see page 6.)
Remote Control
Transmitter Visor Clip
LOCK
LIGHT
Door Control Panel
| Y |
| NL |
| T O |
| UN |
G | MO |
ILIN |
|
CE |
|
| UP |
Motor Unit with Light Lens
Header Bracket
SECURITY✚ | Belt Cap Retainer |
| Styrofoam |
| |
White & White/Red |
|
Curved Door | Door Bracket |
| |
Arm Section |
|
Trolley
Belt
Pulley Bracket
Rail Grease | Safety Sensor | |
Bracket (2) | ||
|
Belt
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye) with
Straight Door
Safety LabelsArm Section and
Literature
Hardware Inventory
INSTALLATION HARDWARE | Lock Washer 5/16" (4) |
Hex Screw #8x3/8" (3) | Screw |
Hex Bolt | Screw |
Lag Screw | Insulated Staples (30) |
Lag Screw | Ring Fastener (3) |
Handle | |
Clevis Pin | Drywall Anchors (2) |
Clevis Pin | Rope |
Clevis Pin 5/16"x1" (1) | Carriage Bolts |
Nut | Wing Nut 1/4"x20 (2) |
5