INSTALLATION STEP 8
Mount the Standby Power Unit (SPU)
(Not Provided)
If the optional 475LM Standby Power Unit is part of this installation it should be installed at this time.
• The SPU can be mounted to either the ceiling or a wall
within 3' (.9 m) of the motor unit. |
|
• Position the SPU as desired to a structural support |
|
(ceiling joist or wall stud). |
|
• Attach the SPU to the support using the mounting holes |
|
on either side of the SPU. |
|
• Secure the SPU using the |
|
with the SPU unit. |
|
• Connect the SPU cord into the connector on the bottom |
|
of the motor unit. |
|
• Follow all instructions included with the 475LM unit to |
|
test for proper operation and testing of the SPU. | SPU Cord |
475LM Standby 
Power System
Connector
13