TABLE OF CONTENTS

Introduction2-5

Safety symbol review and signal word review . . . . . . . . . . 2 Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparing your door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Tools needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Carton inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hardware inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly

6

Attach the collar to the operator. . . . . . . . . . . . . . . . . . . . . 6 Attach mounting bracket to the operator . . . . . . . . . . . . . . 6

Installation7-16

Installation safety instructions . . . . . . . . . . . . . . . . . . . . . . 7 Position the operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Attach the emergency release rope and handle . . . . . . . . 8 Install power door lock (Not Provided) . . . . . . . . . . . . . . . . 8 Attach the cable tension monitor (Required) . . . . . . . . . . . 9 Install the single button control station. . . . . . . . . . . . . . . 10 Install the light (Not Provided) . . . . . . . . . . . . . . . . . . . . . 11 Electrical requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Mount the Standby Power Unit (SPU) (Not Provided) . . . 13 Install The Protector System®. . . . . . . . . . . . . . . . . . . 14-16

Adjustment17-20

Operation21-25

Operation safety instructions . . . . . . . . . . . . . . . . . . . . . . 21 Using your door operator . . . . . . . . . . . . . . . . . . . . . . . . . 21 Care of your operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Having a problem? (Troubleshooting) . . . . . . . . . . . . 23-24 Diagnostic Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Programming26-28

To add or reprogram a hand-held

remote control (Not Provided) . . . . . . . . . . . . . . . . . . . . . 26 To erase all codes from motor unit memory . . . . . . . . . . 26 3-Button remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 The remote control battery . . . . . . . . . . . . . . . . . . . . . . . . 26 To add, program or change a keyless entry

PIN (Not Provided) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Programming remote light (Not Provided) . . . . . . . . . . . . 28

Repair Parts

29

Installation parts . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 29

Motor unit assembly parts . . . . . . . . . . . . .

. . . . . . . . . . . 29

Accessories

30

Notes

31

Repair Parts and Service

Back Page

Program the travel limits . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setting the force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Test the safety reversal system . . . . . . . . . . . . . . . . . . . . 19

Test The Protector System® . . . . . . . . . . . . . . . . . . . . . . . 19

Test cable tension monitor . . . . . . . . . . . . . . . . . . . . . . . . 20

To open door manually . . . . . . . . . . . . . . . . . . . . . . . . . . 20

INTRODUCTION

Safety Symbol Review

and Signal Word Review

This door operator has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in strict accordance with the instructions and warnings contained in this manual.

Mechanical

When you see these Safety Symbols and Signal Words on the following pages, they will alert you to the possibility of serious injury or death if you do not comply with the warnings that accompany them. The hazard may come from something mechanical or from electric shock. Read the warnings carefully.

Electrical

When you see this Signal Word on the following pages, it will alert you to the possibility of damage to your garage door and/or the garage door operator if you do not comply with the cautionary statements that accompany it. Read them carefully.

2