Chamberlain 5100-2K 6

Carton Inventory

Your garage door opener is packaged in one carton which contains all parts illustrated below. If anything is missing, carefully check the packing material. Parts may be "stuck" in the foam. Hardware for assembly and installation is shown on page 7.

LOCK

LIGHT

Multi-Function		2-Conductor Bell Wire
Remote Control Transmitter (2)	Cable Pulley	White & White/Red
	Bracket	Multi-Function
		Multi-Function
		Control Panel

Wireless Keyless Entry (1)

Trolley

	Light Lens (2)	T-Rail
	Light Lens (2)	End Section (2)
		End Section (2)

Rail Brace (3)

Door Bracket

Door Bracket

Plate

ONLY

MOUNT

CEILING

UP

T-Rail

Center Section (2)

Header Bracket

Chain and Cable in	Sprocket Cover
Dispensing Carton

Safety Reversing Sensor

Mounting Bracket

With Square Holes (2)

Hanging Brackets

		Straight Door
"C" Wrap (2)	Curved Door	Arm Section
	Curved Door
	Arm Section

Safety Reversing Sensor

Mounting Bracket With Slot (2)

	Safety Reversing Sensor (2)	2-Conductor Bell Wire with Connector	Safety Labels
	(1) Sending Eye	White & White/Black (2 rolls)	Safety Labels
	(1) Sending Eye	White & White/Black (2 rolls)	and
	(1) Receiving Eye		and
	(1) Receiving Eye		Literature
			Literature

6

Contents

Page Contents Assembly section - pages 8 – Installation section - pages 11 – Adjustment section - pages 28 – Start by reviewing these important safety alert symbols: Page SECTIONAL Door Installation installation Closed Position ONE-PIECEDoor Installation One-PieceDoor Without Track One-PieceDoor With Track Page Assembly Hardware Installation Hardware Safety Reversing Sensor Assemble the T-rail & Attach the Cable Pulley Bracket Install the Trolley on the T-rail Fasten the T-railto the Opener Install the Chain/Cable & Attach the Sprocket Cover Tighten the Chain & Cable Determine Header Bracket Location ONE-PIECEDoor Without Track Install the Header Bracket Attach the T-railto the Header Bracket Position the Opener Hang the Opener Install the Door Control Install the Light and the Lenses Attach the Manual Release Rope and Handle Electrical Requirements Page Install the Safety Reversing Sensor Trouble Shooting Fasten Door Bracket Connect Door Arm to Trolley All ONE-PIECEDoor Installation Procedure All ONE-PIECEDoors Assemble the Door Arm: Adjustment Procedures for One-PieceDoors Open Door Adjustment: Decrease UP limit Adjust the UP and DOWN Limits Adjust the Force Test The Protector System® Test the Safety Reverse System Maintenance Schedule Operation of Your Opener Operation of the Multi-FunctionDoor Control Panel To Add A Remote To Change the Selected Push Button On the Same Remote To Erase All Remote Control Codes All Situation Probable Cause & Solution The opener doesn't operate from either the door control or the remote control: Opener operates from the remote control but not from the door control: The door operates from the door control, but not from the remote control: (continued) Rail Assembly Parts Installation Parts Opener Assembly Parts 7702CB Outside Quick Release: 760CB Outside Keylock: 7704CB Access Door/Outside Quick Release Accessory Garage Door Manual Release Rope & Handle Opener Terminals Operational Noise CHAMBERLAIN GARAGE DOOR OPENER ONE-YEARLIMITED WARRANTY LIMITED WARRANTY ON MOTOR - MODEL 5100-2K