Chamberlain BG 3000-B3, SL 1000-B3, SW 2000-B3 manual 20

G. SYSTEM LAYOUTS AND CONTROL WIRING

	Additional
Master Wiring
	(if needed):		Can use Radio or Cycle if
Fire			Exit Loop is	not used.
Manual Inputs
Interrupt Bar			Directional Exit Loop
Photo-Sensors					Swing gate open
MagLock
Warning Relay			Inside Interrupt Loop		direction and its
Tel. Line					maximum arc.
			Shadow Loop
	Gate				Gate
			(swing gates only)
	Operator				Operator
	Master			Cable	Slave
Fence					Fence
		Slide, Barrier or Swing Gate		Slide, Barrier or Swing Gate
			Outside Interrupt Loop
			Directional Exit Loop
			Can use Radio or Cycle if
			Exit Loop is not used.
					1398F8

Figure 12. Bi-Part, Bi-Directional Gate System.

NOTE: If Radio is used, only one receiver/transmitter is required for both directions.

	Additional
Master Wiring
	(if needed):		Can use Radio* or Cycle if
Fire			Exit Loop is not used.
Manual Inputs
Interrupt Bar			Exit Loop
Photo-Sensors
MagLock
Warning Relay			Inside Interrupt Loop
Tel. Line
			Shadow Loop
	Gate
			(swing gates only)
	Operator
	Master			Cable
Fence
		Slide, Barrier or Swing Gate		Slide, Barrier or Swing Gate
			Outside Interrupt Loop

Swing gate open direction and its maximum arc.

Gate

Operator

Slave

Fence

1398F9

Figure 13. Bi-Part, Uni-Directional Gate System

(Swing gate, if used, opens in).

* WARNING

If Radio is used, gate system becomes bi-directional, compromising safety and security.

Rev E Doc 01-20201 17 of 33