Chamberlain BG 3000-B3, SL 1000-B3, SW 2000-B3 manual 24

Master/

Slave

Cable

						Can use Radio or Cycle if
		Additional
							Exit Loop is not used.
Master Wiring
	(if needed):							Directional Exit Loop
Fire
Manual Inputs
Interrupt Bar							Outside Interrupt		Loop
Photo-Sensors
MagLock
Tel. Line					Slide, Barrier or Swing Gate
			Gate							Swing gate open
			Operator					Shadow Loop		direction and its
			Master							maximum arc.
								(swing gates only)
								Inside Interrupt	Loop
			Additional
		Slave Wiring
			(if needed):
		Interrupt Bar
		Photo-Sensors
		MagLock
				Gate
			Operator
			Slave					Inside Interrupt	Loop
								Slide or Barrier Gate
							Outside Interrupt		Loop
								Directional Exit Loop
						Can use Radio or Cycle if
								Exit Loop is not used.
										1398F15

Figure 19. Bi-Directional Trap Gate System

(Swing gate opens out).

NOTE: If Radio will be used in both gates, each gate will require a separate receiver/transmitter with a separate entry code.

Rev E Doc 01-20201 21 of 33