C. MASTER/SLAVE INSTALLATION DETAILS

1.BI-PARTING GATE DETAILS

The simple Bi-Parting Gate is typically used in low traffic residential sites due to its ease of use. The Bi- Parting configuration can consist of any combination of models SL 1000-B3 (slide gate),

SW 2000-B3 (swing gate), and BG 3000-B3 (barrier gate).

ADDITIONAL

INPUTS:

Radio

Cycle

Interrupt Bar

Photo-Sensors

Fire

MagLock

Manual Inputs

Gate

Operator

Master

Fence

COMPLEX

 

 

 

Exit Loop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Inside Interrupt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Loop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gate

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Shadow Loop

 

 

 

 

 

 

 

 

Operator

 

 

 

 

 

 

 

 

 

 

(swing gates only)

 

 

 

 

 

 

 

 

 

 

Master/Slave Cable

Slave

 

 

 

 

 

 

 

Master Gate

 

Slave Gate

Fence

 

 

 

 

Outside Interrupt

 

 

 

Connect MagLock to one unit only.

 

 

Loop

 

 

 

STREET

1384F2

 

Figure 2. Typical Bi-Parting Gate Installation.

HOW IT WORKS:

•The gates in a Bi-Parting configuration are mirror images of each other and act identically.

•A Fault in one unit affects both units (see Troubleshooting/Maintenance for Fault List in the Installation and Operation manual for the individual gate).

•A Continuous open input in either unit opens the gates and holds them open.

There are 3 different ways to close the gates (entering or exiting):

1.Reclose Timer: When the Reclose Timer expires, gates close automatically.

2.ATG (Anti-Tailgate) and Interrupt Loop: With ATG ON, clearing the Inside Interrupt Loop closes the

gates. NOTE: For safety reasons, ATG does not function with gate type SWING or LINEAR.

3.Alternate Action: With ATG and TIMER OFF, a Radio or CYCLE command will close fully-open gates.

INPUT CONNECTIONS: Refer to Part 2, Master/Slave Layout and Wiring, for more details.

•Inputs can be connected to either gate.

Rev E

Doc 01-20201

4 of 33