INSTALL THE PROTECTOR SYSTEM®
1 Assemble Safety Reversing Sensors | 2 Mount Brackets |
| |
|
| Garage door track installation (preferred) | |
| A17 Safety Reversing Sensor |
|
|
|
| Door Track | Indicator |
|
|
| |
|
|
| Lens Light |
A17 |
|
|
|
Safety | C12 |
|
|
Reversing | Carriage |
|
|
Sensor | Bolts |
| Sensor Beam |
|
|
| |
|
|
| No Higher |
| A10 |
| Than 6" (15 cm) |
|
| Above Floor | |
| Safety Sensor |
|
|
| Bracket |
|
|
C14 Wing Nut
Mount Brackets: Mounting Options
2a Floor installation (optional) | 2b Wall installation (optional) | 2c Wall installation with |
|
| Extension Brackets (optional) |
Attach with concrete anchors (Not provided)
OR
Inside Garage Wall
Fasten 2x4 to Wall with Lag Screws (Not Provided)
OR
Extension Bracket
(see Accessories)
(Provided with Extension Bracket)
Sensor Beam No Higher
Than 6" (15 cm) Above Floor
NOTE: The safety reversing sensor must be connected and aligned correctly before the garage door opener will move in the down direction.
Sensor Beam |
|
|
| |
No Higher Than |
|
| Sensor Beam | |
6" (15 cm) |
|
| ||
|
| No Higher Than | ||
Above Floor | Lag Screws | (Provided with | ||
6" (15 cm) | ||||
| (Not Provided) | Extension Bracket) | Above Floor |
Safety Reversing Sensors | Safety Reversing Sensors |
MUST be aligned and no higher | MUST be aligned and no higher |
than 6" (15 cm) above floor | than 6" (15 cm) above floor |
ALL HARDWARE SHOWN ACTUAL SIZE
C12 Carriage Bolt | C14 Wing Nut |
18