| ® | Models PIRV400R | |
|
|
| |
|
|
| Wireless Pedestrian & Vehicle Sensor with Voice |
|
|
| AOSV |
Overview |
|
| |
|
| Wireless Office Alert |
The PIR Motion Sensor only works with Chamberlain's Wireless Pedestrian & Vehicle Alert with Voice (Model RWV400R) and Office Alert (Model CWV1000). The PIR Motion Sensor can be used to monitor motion up to 30' away and can transmit a signal up to 1000' away from the Base Station (not included). The Passive
Carton Inventory
Swivel Bushing
Mounting Plate
Passive
Motion Sensor
Operation & Features
PIR Motion | Base Station | ||||
Sensor | (not provided) | ||||
PIR Sensor/Test Light |
|
|
| ||
Talk | Volume Button |
| |||
|
|
|
| ||
|
|
|
|
| |
|
|
|
| ||
|
|
| (Power - On) | ||
|
|
|
|
|
|
| Remote |
|
|
| Relay Output | |||
| Activation |
|
|
| Contacts | |||
| Button |
|
|
|
|
|
| |
|
|
| AC Adapter | |||||
|
| Learn |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| Switch #1: Mute |
|
| |||
|
| Button |
|
|
| |||
|
|
| Switch #2: Tone |
|
| |||
Speaker |
|
|
|
|
| |||
|
| |||||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
On/Off: To turn Base Station OFF hold down the Volume button until a beep is heard and light goes out. To turn Base Station ON press the Talk button.
To prevent possible SERIOUS INJURY or DEATH from electrocution, outputs are suitable ONLY for controlling low voltage devices, 24V max, ac or dc.
Intercom Feature: When PIR Motion Sensor has detected motion, the Base Station will allow you to listen through the PIR Motion Sensor for 10 seconds. If you wish to talk to the person on the other end, hold down the Talk button and speak, releasing it to hear.
Volume: Pressing the Volume button repeatedly will cycle through volume levels.
Mute: To temporarily mute Base Station, hold the Volume and Talk buttons down for three seconds. The Base Station will reactivate after one hour, or by pressing the Talk button.
Remote Button: If there is an accessory device connected to the relay on the PIR Motion Sensor, it can be activated by pressing the Remote button within 30 seconds of the signal from the alert buzzer.
Switch #1:
OFF | Buzzer Off |
ON | Buzzer On (Default) |
OFF
Switch #2: | 1 |
| 2 | ON | ||
|
|
|
| |||
|
|
|
| |||
OFF | Long Buzz |
|
|
|
| |
|
|
|
|
|
| |
ON | Short Buzz (Default) |
|
|
|
|
|
Battery: The AA Alkaline batteries (not provided) will last up to 2 years depending on use (Lithium batteries recommended for colder environments). If PIR Motion Sensor batteries are low Base Station will emit three
Clear Memory: Press and hold the Learn button on the Base Station until 3 beeps are heard. If the PIR Motion Sensor signals while Learn button is pressed, repeat the procedure.
Programming Additional PIR Motion Sensors:
Each Base Station can learn the code of up to 8 PIR Motion Sensors, responding with multiple buzzes. To program additional PIR Motion Sensors see Step 6.
1