Weather conditions may | FORCE CONTROLS | ||||
cause some minor changes | |||||
|
|
|
| ||
|
|
|
| ||
in door operation requiring | 9 | 1 | 9 | 1 | |
some | 7 | 5 | 7 | 5 | |
| 3 | 3 | |||
particularly during the first |
| KG |
| KG | |
year of operation. |
|
|
|
|
Pages 27 and 28 refer to the LIMIT CONTROLS limit and force adjustments.
Only a screwdriver is required. Follow the
instructions carefully.
Repeat the safety reverse test (AdjustmentStep 3, page 29) after any adjustment of limits or force.MAINTENANCE SCHEDULEOnce a Month•Manually operate door. If it is unbalanced or binding, call a trained door systems technician.
•Check to be sure door opens & closes fully. Adjust limits and/or force if necessary (see pages 27 and 28).
•Repeat the safety reverse test. Make any necessary adjustments (see Adjustment Step 3).
Once a Year•Oil door rollers, bearings and hinges. The opener does not require additional lubrication. Do not grease the door tracks.
WARNING
To prevent possible SERIOUS INJURY or DEATH:
•NEVER allow small children near batteries.
•If battery is swallowed, immediately notify doctor.
The lithium battery should produce power for up to
5 years. To replace battery, use the visor clip or screwdriver blade to pry open the case as shown. Insert battery positive side up (+).
Dispose of old battery properly.
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
32