MDS-6AINSTALLATION MANUAL

SECTION 1 - INTRODUCTION

1.1- FEATURE OVERVIEW

6 Sources / 6 Zones

The MDS-6A enables you to independently listen to and control up to six differ- ent audio sources (i.e. Tuner, CD, Tape Deck - and the audio signals from your VCR, DVD, and Satellite Receiver) in six distinct listening areas or “zones”.

12 Channel x 40 WPC Power Amplifier

The MDS-6A features 12 channels of amplification capable of delivering 40 watts per channel into 8 ohms. The MDS-6A provides more than enough clean, dynamic power to drive a house full of speakers all day long!

Compatible with MCS Zone Controllers and IR Receivers

The MDS-6A’s zones can be controlled using MCS-1A Zone Controllers,

MCS-2A Programmable Zone Controllers, and/or IR Receivers. Add multiple

MCS Controllers and/or IR Receivers for maximum flexibility.

User Feedback to All System Controllers

Unlike other basic multi-zone systems, the MDS-6A receives IR data and trans- mits feedback to MCS Controllers. These features inform the user of which Source is currently selected, Zone ON/OFF Status, Mute, Do-Not-Disturb, Whole-House Music Status, and more!

MCS Controller RJ-45 Jacks and Removable Speaker

Terminals for Easy Connectivity

In addition to the six plug 'n play RJ45 jacks for MCS Controllers and IR Receivers, the MDS-6A features installer-friendly removable speaker terminals which accept up to 14 AWG wire.

6 Source-Specific IR Output Ports Plus 1”ALL” Port

Six source-specific IR output ports enable multiple ‘same make/model’ compo- nents to be used without conflict or interference. An IR ALL port is also provided.

© Channel Plus, Inc 2004 • All rights reserved. 4/04

Page 5

Page 5
Image 5
Channel Plus MDS-6A installation manual Feature Overview