Programming Codes
To program the advanced options of the
Default Settings:
CHIME 1 and 2 are momentary closure.
STRIKE 1 and 2 is set for a 3 second closure period
AUX is configured to provide contact closure when STRIKE 1 is active Distinctive Ring is set for option 3
CHART 1
Programming procedures for
x 0 y z Replace x, y and z with numbers shown below:
0Momentary closure for strikes and chimes contacts (300 msec)
1To program CHIME 1
2To program CHIME 2
3To program Distinctive Ring
6To program AUX contact
7To program STRIKE 1
8To program STRIKE 2
0Press 0 to enter the programming mode, press # (or*) to save changes. Hang up the phone to exit without saving.
#If the
CHART
CHIME duration
Option Duration of contact closure
13 seconds
25 seconds
3 8 seconds
4 16 seconds
5 25 seconds
6 60 seconds
7 120 seconds
8 180 seconds
9 240 seconds
CHART
STRIKE duration
Option Duration of contact closure
13 seconds
25 seconds
3 8 seconds
4 16 seconds
5 25 seconds
6 60 seconds
7 120 seconds
8 180 seconds
9 240 seconds
CHART
Selecting a distinctive ring
| # operation | *operation | ||
| Door 1 | Door 2 | Door 1 Door 2 | |
1 | 2/1 | 2/2 | 2/3 | 2/4 |
2 | 2/3 | 2/4 | 2/1 | 2/2 |
3 | 3 | 5 | 2/3 | 2/5 |
4 | 2/3 | 2/5 | 3 | 5 |
5 | 3 | 5 | 3 | 5 |
1st ring/2nd ring examples:
2/1 = “ring, ring, ... ring”
2/3 = “ring, ring, ... ring, ring, ring”
Example: (assuming the
First, access the intercom system by pressing ##.
To set STRIKE 2 to operate for 8 seconds, pick up any
To set STRIKE 2 to operate for 25 seconds, pick up any
6