Using the TE110DS
The TE110DS is not always required when using the P-0921, because the P-0921 has a built in AUX relay that can be programmed to control one electronic door strike. However, it may still be used for applications that require a remote contact closure that is located near the door intercom station.
If using the RJ-45 connection on the P-0921, simply connect the green and green-white wires from the CAT5 to the terminal inputs and outputs of the TE110DS as shown below. If using the screw terminal connectors on the P-0921, simply use the same
Connection Details
Green/Green-White wires 
From P-0921
(Door 1 or Door 2)
Cut the outer jacket of the CAT5 wire. Separate and cut the green & green-white. Connect them as shown. Leave all other wires intact.
Door Intercom Station
| Strike | |
| power | To Strike |
| supply |
| Mechanism |
