Chaparral Chaparral FS 1310 manual System Configuration Screen

LAN Configuration

System Configuration Screen

Option 1 from the Network Management System Console screen displays the System Configuration screen.

Table B-1describes the settings you can change here.

Table B-1. System Configuration screen settings

Option	Setting	Description
1	System name	Name of the router as seen by other systems on the network.
		You can enter up to 80 characters. Default is router fxxxxx
		where xxxxx is the last 5 digits of the MAC address.
2	System Contact	Name of a contact person responsible for the router. You can
		enter up to 80 characters.
3	System	Location of the router. You can enter up to 32 characters.
	Location
4	Telnet Password	Password for accessing the router using the Ethernet port and
		Telnet. You can enter up to 32 characters. Default is null (press
		Enter).
5	Telnet Timeout	Number of idle seconds before the Telnet session times out.
		Default is no timeout.
6	FTP Login	Login name for FTP access to the router. You can use FTP to
	Name	download firmware updates. You can enter up to 15 characters.
		Default is flash.
7	FTP Password	Password for FTP access to the router. You can enter up to 15
		characters. Default is flash.
8	Allow FTP	Yes or No toggle. This permits firmware updates to the LAN
	Updates?	board using FTP.
9	Jump to	Yes or No toggle. Yes means the Router Administrator software
	Controller?	displays after connecting to the controller using the Ethernet
		port. No means the Network Management System Console
		screen displays after connecting to the router using the Ethernet
		port. The default is Yes.
ESC	Exit	Saves all changes and returns to the Network Management
		System Console screen

B-5