Chaparral Chaparral FS 1310 manual Troubleshooting

FS1310 Rack/Desktop Model User’s Guide

	Changing the Scan Delay	3-15
	Enabling and Disabling the Alarm	3-16
	Restoring the Default Settings	3-18
	Rebooting the Router	3-19
	Changing and Displaying Device Information	3-20
	Changing the Mapping Mode (AUTO or FIXED)	3-20
	Changing Device Addresses (FC LUNs)	3-21
	Displaying the Devices Connected to the Router	3-23
	Displaying the FC-to-SCSI Address Map	3-23
	Displaying Router Information	3-24
	Displaying the Event Log	3-24
	Displaying Hardware and Configuration Information	3-27
	Displaying the Router’s FC LUN	3-30
	Upgrading Firmware	3-31
	Upgrading the Router’s Firmware	3-31
	Upgrading the Ethernet Card’s Firmware	3-33
4	Troubleshooting
	Chaparral Technical Support	4-1
	Problems During Bootup	4-1
	Restoring the Default Configuration Through the Flash Utility	4-3
	Terminal Emulator and COM Port Problems	4-4
	Device SCSI Channel Problems	4-5
	Router is Not Responding	4-6
	Using the Loader Diagnostics Menu	4-6
	Using the Loader Utility Menu	4-6
	Event Logs	4-6
	Event Log File Capture	4-7
	Voltage and Temperature Errors and Warnings	4-8
	Setting Up Debug Logging	4-8

AAddress and Device Mapping

	Loop ID to AL_PA Mapping	A-3
B	LAN Configuration
	Configuring the Router for TCP/IP	B-1
	Using Address Resolution Protocol	B-2
	Dynamic Host Configuration Protocol Configuration	B-3
	Configuring the Additional LAN Settings	B-3

vi