Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper 18HP, 19HP manual Troubleshooting, Adjustments, & Service, Troubleshooting the Rider

Models: 18HP, 19HP

1 36
Download 36 pages 61.26 Kb
Page 22
Image 22

Troubleshooting, Adjustments, & Service

TROUBLESHOOTING

While normal care and regular maintenance will extend the life of your equipment, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly.

The troubleshooting guide below lists the most common problems, their causes and remedies.

See the information on the following pages for instruc- tions on how to perform most of these minor adjustments and service repairs yourself. If you prefer, all of these procedures can be performed for you by your local authorized dealer.

WARNING

To avoid serious injury, perform maintenance on the rider or mower only when the engine is stopped and the parking brake engaged. Always remove the ignition key, disconnect the spark plug wire and fasten it away from the plug before beginning the maintenance, to prevent accidental starting of the engine.

TROUBLESHOOTING THE RIDER

PROBLEM

CAUSE

REMEDY

Engine will not turnover or start.

1.

Parking brake not engaged.

1. Engage parking brake.

 

2.

PTO (electric clutch) switch

2. Place in OFF position.

 

 

in ON position.

 

 

3.

Out of fuel.

3. If engine is hot, allow it to cool, then refill

 

 

 

the fuel tank.

 

4.

Engine flooded.

4. Open the choke.

 

5.

Gas is old or stale.

5. Drain fuel & replace with fresh fuel.

 

6.

Battery terminals require

6. Clean the battery terminals

 

 

cleaning.

 

 

7.

Battery discharged or dead.

7. Recharge or replace.

 

8.

Wiring loose or broken.

8. Visually check wiring & replace broken or

 

 

 

frayed wires. Tighten loose connections.

 

9.

Solenoid or starter motor faulty.

9. Repair or replace. See authorized dealer

 

10.

Safety interlock switch

10. Replace as needed. See authorized

 

 

faulty.

service dealer.

 

11.

Spark plug(s) faulty, fouled

11. Clean and gap or replace.

 

 

or incorrectly gapped.

See engine manual.

 

12.

Water in fuel.

12. Drain fuel & refill with fresh fuel.

 

 

 

 

Engine starts hard or runs poorly.

1.

Fuel mixture too rich.

1. Clean air filter. Check the choke.

 

2.

Spark plug faulty, fouled, or

2. Clean and gap or replace.

 

 

incorrectly gapped.

(See engine manual.)

 

 

 

 

Engine knocks.

1.

Low oil level.

1. Check/add oil as required.

 

2.

Using wrong grade oil.

2. See engine manual.

 

 

 

 

Excessive oil consumption.

1.

Engine running too hot.

1. Clean engine fins, blower screen and

 

 

 

air cleaner.

 

2.

Using wrong weight oil.

2. See engine manual.

 

3.

Too much oil in crankcase.

3. Drain excess oil.

 

 

 

 

Engine exhaust is black.

1.

Dirty air filter.

1. Replace air filter. See engine manual.

 

2.

Engine choke control

2. Open choke control.

 

 

is in closed position.

 

21

Page 21 Page 23
Page 22
Image 22
Snapper 18HP, 19HP manual Troubleshooting, Adjustments, & Service, Troubleshooting the Rider
Page 21 Page 23

18HP, 19HP specifications

The Snapper 18HP and 19HP mowers are powerful and versatile machines designed for residential and light commercial use. Known for their reliability and efficient performance, these mowers are well-suited for homeowners looking to maintain their lawns with ease and precision.

One of the standout features of the Snapper 18HP and 19HP models is their robust engine performance. With an 18 or 19 horsepower engine, these mowers deliver ample power to tackle a variety of grass types and challenging terrains. The engines are designed for optimal fuel efficiency without sacrificing performance, ensuring that users can complete their mowing tasks without frequent refueling.

Another significant characteristic of the Snapper mowers is their cutting technology. The models are equipped with a high-performance cutting deck that provides a clean and even cut, promoting healthy grass growth. The adjustable cutting heights allow users to choose the perfect setting for their lawn, accommodating different grass types and seasonal needs. This versatility makes the Snapper mowers ideal for various landscaping projects, whether it’s a manicured lawn or a more rugged field.

The Snapper 18HP and 19HP mowers also showcase advanced ergonomic design. The comfortable seating and intuitive control systems enable users to operate the mower with ease. The strategically placed controls ensure that everything is within reach, providing a seamless mowing experience. Furthermore, the mowers feature a tight turning radius, allowing for superior maneuverability around obstacles like trees and flower beds.

Additionally, these mowers come with durable construction, made from high-quality materials that withstand the rigors of regular use. The heavy-duty steel frame ensures longevity, while the rust-resistant finish helps the machine maintain its appearance over time. Maintenance is made simple with easily accessible components, allowing users to perform routine checks and services without difficulty.

Safety features are also integrated into the design of Snapper mowers. The presence of safety switches and a robust braking system ensures that operators can mow with confidence, minimizing the risk of accidents.

In summary, the Snapper 18HP and 19HP mowers blend power, efficiency, and comfort into one comprehensive package. With their advanced cutting technology, ergonomic design, and durable construction, they are excellent choices for anyone looking to maintain their lawn effectively. Whether you're a seasoned landscaper or a weekend warrior, these mowers deliver the performance and reliability you need.