Snapper 18HP, 19HP manual Seat Adjustments, Speed Balancing Adjustment, Seat Position Adjustment

Models: 18HP, 19HP

1 36
Download 36 pages 61.26 Kb
Page 24
Image 24

Troubleshooting, Adjustments, & Service

A

B

Figure 19. Seat Adjustment

A.Adjustment Knobs

B.Seat Springs

SEAT ADJUSTMENTS

The seat and ground speed control levers should be adjusted so that operator’s elbows are supported by the arm rests when his/her hands are on the controls, and the ground speed control levers can be moved through their full range of motion without contacting the opera- tor’s legs.

Seat Position Adjustment

See Figure 19. The seat can be adjusted forward and back. Remove the knobs (A), move the seat to the desired position, then reinstall and tighten the knobs.

C

 

A

B

Figure 20. Control Lever Adjustment

A.Alignment Hardware

B.Placement Hardware

C.Ground Speed Control Lever

C

B

A

Figure 21. Top Speed Adjustment

A.Forward Top Speed Adjustment Bolt

B.Control Lever Base

C.Reverse Top Speed Adjustment Bolt

Seat Spring Adjustment

SPEED BALANCING ADJUSTMENT

Move the seat springs (B, Figure 19) into the front of the adjustment slot for lighter operators, and to the rear for heavier operator’s.

GROUND SPEED CONTROL LEVER ADJUSTMENT

The control levers can be adjusted in three ways. The alignment of the control levers, the placement of the levers (how close the ends are to one another) and the height of the levers can be adjusted.

To Adjust the Handle Alignment: Loosen the mount bolts (A, Figure 20) and pivot the lever(s) (C) to align with each other.

To Adjust the Handle Placement: Loosen the jam nuts and adjust the placement bolt (B, Figure 20) in or out to properly adjust the lever end spacing.

To Adjust the Handle Height: Remove the mounting hardware and reposition the handle either up or down from its original position. You will need to readjust the handle alignment as described above.

WARNING

DO NOT adjust the rider for a faster overall speed forward or reverse than it was designed for.

If the rider veers to the right or left when the ground speed control levers are in the maximum forward or reverse position, the top speed of each of these levers can be balanced by turning the adjustment bolt(s) (A & C Figure 21). Only adjust the speed of the wheel that is traveling faster.

TO REDUCE THE SPEED OF THE FASTER WHEEL

1.Loosen the jam nut securing the top speed adjust- ment bolt (A, C).

2.Turn the top speed adjustment bolt COUNTER- CLOCKWISE to reduce the speed.

3.Retighten the securing nut when adjustment is com- plete.

23

Page 24
Image 24
Snapper 18HP, 19HP manual Seat Adjustments, Speed Balancing Adjustment, Ground Speed Control Lever Adjustment

18HP, 19HP specifications

The Snapper 18HP and 19HP mowers are powerful and versatile machines designed for residential and light commercial use. Known for their reliability and efficient performance, these mowers are well-suited for homeowners looking to maintain their lawns with ease and precision.

One of the standout features of the Snapper 18HP and 19HP models is their robust engine performance. With an 18 or 19 horsepower engine, these mowers deliver ample power to tackle a variety of grass types and challenging terrains. The engines are designed for optimal fuel efficiency without sacrificing performance, ensuring that users can complete their mowing tasks without frequent refueling.

Another significant characteristic of the Snapper mowers is their cutting technology. The models are equipped with a high-performance cutting deck that provides a clean and even cut, promoting healthy grass growth. The adjustable cutting heights allow users to choose the perfect setting for their lawn, accommodating different grass types and seasonal needs. This versatility makes the Snapper mowers ideal for various landscaping projects, whether it’s a manicured lawn or a more rugged field.

The Snapper 18HP and 19HP mowers also showcase advanced ergonomic design. The comfortable seating and intuitive control systems enable users to operate the mower with ease. The strategically placed controls ensure that everything is within reach, providing a seamless mowing experience. Furthermore, the mowers feature a tight turning radius, allowing for superior maneuverability around obstacles like trees and flower beds.

Additionally, these mowers come with durable construction, made from high-quality materials that withstand the rigors of regular use. The heavy-duty steel frame ensures longevity, while the rust-resistant finish helps the machine maintain its appearance over time. Maintenance is made simple with easily accessible components, allowing users to perform routine checks and services without difficulty.

Safety features are also integrated into the design of Snapper mowers. The presence of safety switches and a robust braking system ensures that operators can mow with confidence, minimizing the risk of accidents.

In summary, the Snapper 18HP and 19HP mowers blend power, efficiency, and comfort into one comprehensive package. With their advanced cutting technology, ergonomic design, and durable construction, they are excellent choices for anyone looking to maintain their lawn effectively. Whether you're a seasoned landscaper or a weekend warrior, these mowers deliver the performance and reliability you need.