![](/images/new-backgrounds/1114774/11477449x1.webp)
Troubleshooting, Adjustments, & Service
CUTTING HEIGHT ADJUSTMENT
The cutting height adjustment pin (A, Figure 22) controls the mower cutting height. The cutting height is adjustable between
To adjust cutting height:
1.Pull the adjustment lever (B, Figure 22) back fully until it locks in transport position.
2.Remove the cutting height adjustment pin (A) and insert it into the desired hole.
3.Pull back on the adjustment lever (B), squeeze the smaller transport release lever (C), and allow the lever to move forward until it is supported by the cut- ting height adjustment pin (A).
ROLLER BAR ADJUSTMENT
The rollers on this Zero Turn unit are not intended to ride on the ground. DO NOT adjust rollers to ride on the ground. Rollers riding on the ground will damage turf and or unit.
C |
B |
A |
Figure 22. Cutting Height Adjustment
A.Cutting Height Adjustment Pin
B.Deck Lift / Cutting Height Lever
C.Transport Release Lever
NEUTRAL ADJUSTMENT
If the unit creeps forward or backward with the control levers in their neutral positions, see your dealer.
24