Safety Rules & Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

This mowing deck is capable of amputating hands and feet and throwing objects.

The triangle in text signifies important cautions or warnings which must be followed.

GENERAL OPERATION

1.Read, understand, and follow all instructions in the manual and on the unit before starting.

2.Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

3.Only allow responsible adults, who are familiar with the instructions, to operate the unit (local regulations can restrict operator age).

4.Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade(s).

5.Be sure the area is clear of other people before mow- ing. Stop the unit if anyone enters the area.

6.Never carry passengers.

7.Do not mow in reverse unless absolutely necessary. Always look down and behind before and while travel- ling in reverse.

8.Never direct discharge material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blade(s) when crossing gravel surfaces.

9.Do not operate the machine without the entire grass catcher, discharge guard (deflector), or other safety devices in place and operational.

10.Slow down before turning.

11.Never leave a running unit unattended. Always disen- gage the blades (PTO), set parking brake, stop engine, and remove keys before dismounting.

12.Disengage blades (PTO) when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

13.Operate the machine only in daylight or good artificial light.

14.Do not operate the unit while under the influence of alcohol or drugs.

15Watch for traffic when operating near or crossing roadways.

16.Use extra care when loading or unloading the unit into a trailer or truck.

17.Always wear eye protection when operating this unit.

18.Data indicates that operators, age 60 years and above, are involved in a large percentage of power equipment-related injuries. These operators should evaluate their ability to operate the equipment safely enough to protect themselves and others from injury.

19.Follow the manufacturer’s recommendations for wheel weights or counterweights.

20.Keep in mind the operator is responsible for accidents occurring to other people or property.

21.All drivers should seek and obtain professional and practical instruction.

22.Always wear substantial footwear and trousers. Never operate when barefoot or wearing sandals.

23.Before using, always visually check that the blades and blade hardware are present, intact, and secure. Replace worn or damaged parts.

24.Disengage attachments before: refueling, removing an attachment, making adjustments (unless the adjustment can be made from the operator’s posi- tion).

25.When the machine is parked, stored, or left unattend- ed, lower the cutting means unless a positive mechanical lock is used.

26.Before leaving the operator’s position for any reason, engage the parking brake (if equipped), disengage the blades (PTO), stop the engine, and remove the key.

27.To reduce fire hazard, keep the unit free of grass, leaves, & excess oil. Do not stop or park over dry leaves, grass, or combustible materials.

28.It is a violation of California Public Resource Code Section 4442 to use or operate the engine on or near any forest-covered, brush-covered, or grass-covered land unless the exhaust system is equipped with a spark arrester meeting any applicable local or state laws. Other states or federal areas may have similar laws.

TRANSPORTING AND STORAGE

1.When transporting the unit on an open trailer, make sure it is facing forward, in the direction of travel. If the unit is facing backwards, wind lift could damage the unit.

2.Always observe safe refueling and fuel handling prac- tices when refueling the unit after transportation or storage.

3.Never store the unit (with fuel) in an enclosed poorly ventilated structure. Fuel vapors can travel to an igni- tion source (such as a furnace, water heater, etc.) and cause an explosion. Fuel vapor is also toxic to humans and animals.

TP 600-4103-00-ZT-UV

2

4.Always follow the engine manual instructions for storage preparations before storing the unit for both short and long term periods.

5.Always follow the engine manual instructions for proper start-up procedures when returning the unit to service.

6.Never store the unit or fuel container inside where there is an open flame or pilot light, such as in a water heater. Allow unit to cool before storing.

Page 3
Image 3
Snapper 18HP, 19HP manual Safety Rules & Information

18HP, 19HP specifications

The Snapper 18HP and 19HP mowers are powerful and versatile machines designed for residential and light commercial use. Known for their reliability and efficient performance, these mowers are well-suited for homeowners looking to maintain their lawns with ease and precision.

One of the standout features of the Snapper 18HP and 19HP models is their robust engine performance. With an 18 or 19 horsepower engine, these mowers deliver ample power to tackle a variety of grass types and challenging terrains. The engines are designed for optimal fuel efficiency without sacrificing performance, ensuring that users can complete their mowing tasks without frequent refueling.

Another significant characteristic of the Snapper mowers is their cutting technology. The models are equipped with a high-performance cutting deck that provides a clean and even cut, promoting healthy grass growth. The adjustable cutting heights allow users to choose the perfect setting for their lawn, accommodating different grass types and seasonal needs. This versatility makes the Snapper mowers ideal for various landscaping projects, whether it’s a manicured lawn or a more rugged field.

The Snapper 18HP and 19HP mowers also showcase advanced ergonomic design. The comfortable seating and intuitive control systems enable users to operate the mower with ease. The strategically placed controls ensure that everything is within reach, providing a seamless mowing experience. Furthermore, the mowers feature a tight turning radius, allowing for superior maneuverability around obstacles like trees and flower beds.

Additionally, these mowers come with durable construction, made from high-quality materials that withstand the rigors of regular use. The heavy-duty steel frame ensures longevity, while the rust-resistant finish helps the machine maintain its appearance over time. Maintenance is made simple with easily accessible components, allowing users to perform routine checks and services without difficulty.

Safety features are also integrated into the design of Snapper mowers. The presence of safety switches and a robust braking system ensures that operators can mow with confidence, minimizing the risk of accidents.

In summary, the Snapper 18HP and 19HP mowers blend power, efficiency, and comfort into one comprehensive package. With their advanced cutting technology, ergonomic design, and durable construction, they are excellent choices for anyone looking to maintain their lawn effectively. Whether you're a seasoned landscaper or a weekend warrior, these mowers deliver the performance and reliability you need.