Regular Maintenance

CHECK TIRE PRESSURES

Tire pressure should be checked periodically, and main- tained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life.

CHECKING / ADDING FUEL

To add fuel:

1.Remove the fuel cap (see A, Figure 17).

2.Fill the tank to the bottom of the filler neck. This will allow for fuel expansion.

 

 

Tire

Pressure

Front

40 psi (2,76 bar)

 

 

Rear

15 psi (1,03 bar)

 

 

Figure 16. Checking Tire Pressure

NOTE: Do not overfill. Refer to your engine manual for specific fuel recommendations.

3. Install and hand tighten the fuel cap.

FUEL FILTER

The fuel filter is located in the fuel line between fuel tank and fuel pump. If the filter is dirty or clogged, replace as follows:

1.Shut off the fuel valve or drain the fuel tank.

2.Disconnect the negative battery cable.

3.Place a container below the filter to catch spilled fuel.

4.Using a pliers, open and slide hose clamps from fuel filter (C, Figure 17).

5.Remove hoses from filter.

6.Install new filter in proper flow direction in fuel line.

7.Secure with hose clamps.

8.Reconnect the negative battery cable when finished.

ENGINE MAINTENANCE

Refer to engine owners manual for all engine mainte- nance procedures and recommendations.

CHECK /FILL TRANSMISSION OIL

Oil Type: Mobil 1™ 15W-50 synthetic oil, Castrol Syntec™ 5W-50 oil, or 20W-50 conventional detergent motor oil.

1.Check the oil level when the unit is cold. The inspec- tion port is located on the inside of the right tank cover. The oil level should be within 1/2” (1.3 cm) of the horizontal level mark (D, Figure 18). If the oil is below this level, proceed to step 2.

2.Before removing the reservoir cap, make sure the area around the reservoir cap and fill neck of the reservoir is free of dust, dirt, or other debris. Loosen the locking capscrew (E, Figure 17) securing the lock- ing tab (D), slide the lock tab back, and remove the cap (B).

WARNING

Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is still hot from recent operation. Do not allow open flame, smoking or matches in the area. Avoid over-filling and wipe up any spills.

Do not remove fuel filter when engine is hot, as spilled gasoline may ignite. DO NOT spread hose clamps further than necessary. Ensure clamps grip hoses firmly over filter after installation.

Do not use gasoline containing METHANOL, gasohol containing more than 10% ethanol, gasoline additives, premium gasoline, or white gas because engine/fuel system damage could result.

B

A

B

D

E

C

Figure 17. Maintenance

A.Fuel Tank Cap

B.Transmission Oil Cap

C.Fuel Filter

D.Locking Tab

E.Locking Screw

19

Page 19 Page 21
Page 20
Image 20
Snapper 18HP, 19HP manual Check Tire Pressures, Checking / Adding Fuel, Fuel Filter
Page 19 Page 21

18HP, 19HP specifications

The Snapper 18HP and 19HP mowers are powerful and versatile machines designed for residential and light commercial use. Known for their reliability and efficient performance, these mowers are well-suited for homeowners looking to maintain their lawns with ease and precision.

One of the standout features of the Snapper 18HP and 19HP models is their robust engine performance. With an 18 or 19 horsepower engine, these mowers deliver ample power to tackle a variety of grass types and challenging terrains. The engines are designed for optimal fuel efficiency without sacrificing performance, ensuring that users can complete their mowing tasks without frequent refueling.

Another significant characteristic of the Snapper mowers is their cutting technology. The models are equipped with a high-performance cutting deck that provides a clean and even cut, promoting healthy grass growth. The adjustable cutting heights allow users to choose the perfect setting for their lawn, accommodating different grass types and seasonal needs. This versatility makes the Snapper mowers ideal for various landscaping projects, whether it’s a manicured lawn or a more rugged field.

The Snapper 18HP and 19HP mowers also showcase advanced ergonomic design. The comfortable seating and intuitive control systems enable users to operate the mower with ease. The strategically placed controls ensure that everything is within reach, providing a seamless mowing experience. Furthermore, the mowers feature a tight turning radius, allowing for superior maneuverability around obstacles like trees and flower beds.

Additionally, these mowers come with durable construction, made from high-quality materials that withstand the rigors of regular use. The heavy-duty steel frame ensures longevity, while the rust-resistant finish helps the machine maintain its appearance over time. Maintenance is made simple with easily accessible components, allowing users to perform routine checks and services without difficulty.

Safety features are also integrated into the design of Snapper mowers. The presence of safety switches and a robust braking system ensures that operators can mow with confidence, minimizing the risk of accidents.

In summary, the Snapper 18HP and 19HP mowers blend power, efficiency, and comfort into one comprehensive package. With their advanced cutting technology, ergonomic design, and durable construction, they are excellent choices for anyone looking to maintain their lawn effectively. Whether you're a seasoned landscaper or a weekend warrior, these mowers deliver the performance and reliability you need.
Top Page Image Contents