Char-Broil 06601295 manual Never fill the cylinder beyond 80% full. An overfilled, Enclosed areas

Items to Assemble:

10 1 Lid Handle

2 Machine Screw

2 Lock Nuts (#10-24) (keps)

1 Temperature Gauge w/Wing Nut

A Attach lid handle to lid with machine screws and hex nuts. Tighten the screws not the hex nuts.

B Remove wing nut from thermometer. Place thermometer into lid and reattach the wing nut

Lid Handle

A

Items to Assemble:

11 3 Lid Hangers

3 #12-14x1/2” Self-tap Screw

Self-tapScrew #12-14x1/2” Qty: 3

AAttach lid hangers inside of lid with self-tap screw as shown..

#10-24	A
	Lid Hangers
Lock Nut
	B
Qty: 2
	Temperature
	Gauge

#10-24x1”
Machine Screw
Qty: 2			Hang lid on side of grill bottom
			from lid hangers.
		Lock Nuts
Wing Nut
12	Items to Assemble
	1	LP Tank		DANGER

sLP tank should be filled at this time.

A Place LP tank onto base as shown. Tighten thumbscrew to	• Never fill the cylinder beyond 80% full. An overfilled
	LP tank is hazardous due to possible gas released
hold tank in position.
	from the safety relief valve.
	• The safety relief valve on the LP tank could activate
	releasing gas and cause an intense fire with risk of
	property damage, serious injury or death.
	• NEVER store a spare LP tank under or near grill or
	in enclosed areas.
	• If you see, smell or hear escaping gas, immediately
	get away from the LP tank/grill and call your fire
	department.
	• All spare LP tanks must have safety caps installed
	on the LP tank outlet.

A

CAUTION

•Failure to install tank correctly may allow gas hose to be damaged in operation.

14 • 06601295