LP (Liquefied Petroleum Gas)
•Is nontoxic, odorless and colorless when produced. For Your Safety, LP gas has been given an odor (similar to rotten cabbage) so that it can be smelled.
•LP gas is highly flammable and may ignite unexpectedly when mixed with air.
Propane Cylinder Use (1 lb. Disposable)
•Use only cylinder marked “Propane Fuel”.
•Cylinder must be constructed and marked in accordance with the specifications for
•Save cylinder cap and reinstall when not in use.
•Cylinder supply system must be arranged for vapor withdrawal. Gas cylinder must be upright in use.
Propane Gas Cylinders
-Your grill is designed to operate with one 16.4 oz. disposable cylinder (Dot 39 Cylinder) that is 7 3/8” high (not included).
Do not attempt to refill any 16.4 oz. disposable fuel cylinders.
-The cylinder must be installed, transported and stored in an upright position and should not be dropped or handled roughly.
-When the appliance is to be stored indoors, the propane gas cylinder must be disconnected from the appliance.
-When the propane gas cylinder is not disconnected from the appliance, the appliance and cylinder must be stored outdoors in a
-The cylinder should never be transported or stored where temperature can reach 125 F (51 C).
-Cylinders must be stored outdoors out of the reach of children.
-A disconnected LP cylinder in storage or being transported must have a safety cap installed. Failure to use safety cap as directed may result in serious personal injury and/or property damage.
-Do not store an LP cylinder in enclosed spaces such as a carport, garage, porch, covered patio or other building.
Propane Cylinder Installation/Removal
Propane Cylinder Installation:
1.Remove cap from end of Propane cylinder (sold separately).
2.Cap should be kept on cylinder when not in use to prevent dirt and debris from entering Regulator/Valve.
3.Check end of cylinder attachment for dirt and debris. Clean out if necessary.
4.Insert threaded end of Propane Cylinder into Regulator/Valve and
5. Perform a leak test. | Turn propane |
| cylinder |
| CLOCKWISE to |
| install. |
| Propane Cylinder |
| (not included) |
Propane Cylinder Removal:
1.Turn regulator OFF.
2.Allow Grill to cool.
3.Remove the propane cylinder by turning
4.Install cap on cylinder. Cap should be kept on cylinder when not in use to prevent dirt and debris from entering Regulator/Valve.
Leak Testing (1 lb. Disposable) IMPORTANT!
•During leak test, keep grill away from open flames or sparks and do not smoke. Grill must be leak tested outdoors in a well ventilated area.
•Leak test must be repeated each time gas cylinder is replaced or after storage.
Materials needed include clean paint brush and 50/50 soap and
water solution. Use mild soap and water. Do not use household cleaning agents. Damage to components can result.
1.Be sure control knob on regulator is in "OFF" position.
2.Brush soapy solution onto connection between gas cylinder and regulator at (A).
If growing bubbles appear, there is a leak. Retighten connection and repeat steps 1 and 2.
If you cannot stop a leak, remove gas
Acylinder from regulator and check for damaged threads, dirt and debris on
regulator and gas cylinder. Also check to see if anything is obstructing flow of gas at regulator and gas cylinder openings. Remove any obstruction that may be found and repeat leak test. If threads are
damaged on either regulator or gas
cylinder, replace. Order new parts by giving the serial, model number and name of items needed to the Grill Service Center at
4
