Char-Broil 463210011 manual Grease tray opening Left rail Right rail

9

Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and facing the front. Secure using two 1/4-20x1½”screws, 7mm lock washers, and 7mm flat washers on each side.

NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN ASSEMBLED TO CART.

Door

Hinge Pin

Control panel

7mm flat	7mm lock	1/4-20x1½”
washer	washer	screw

Front brace

	Insert left and right grease tray rails into slots beneath grease tray opening in upper back panel, shown A.
10
	Attach right and left rails under front brace with two #8x3/8” self-tapping screws, shown B.

AB

Grease tray opening

Left rail

Right rail

Left rail Right rail

#8x3/8”

self-tapping screw

18