15
Release the cap and nut from electronic ignition module. Attach electronic ignition module and heat shield to the cart left side panel with the nut, shown A.
Insert AA battery into ignition module, negative
Connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the Electronic Ignition Module. Total (4) connections.
Connect the two wires [(a) and (b)] from the switch wiring harness into the back of the Electronic Ignition Module. Total (2) connections.
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown as (a),(b).
|
| Electronic |
| A | |
|
| ignition module |
Nut
| Heat shield | 1 |
| |
|
|
| (a) | |
B |
|
| 2 | |
+ | - |
| ||
|
| |||
| 3 |
| ||
|
|
| 4 | (b) |
|
|
|
| |
Cap | AA battery |
|
| |
16
Place the Condiment Basket on the right door inside; make sure to insert the legs of the Condiment Basket into the brackets which were attached on the door inside shown as below.
Bracket
Condiment basket
24
