9
First, remove the two screws and lock washers already attached to the sideburner valve bracket. Position sideburner valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.
Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on fascia. Attach using two
4mm lock washer | Note: Use upper and lower | |
Qty.2 | holes on fascia to | |
Qty.2 |
| attach bezel |
| Sideburner |
|
| shelf fascia |
|
Lock washer |
|
| Valve stem | |
|
| Control knob bezel | ||
|
|
| ||
Screw |
|
| 4mm | |
|
| |||
|
|
| ||
|
|
| lock washer | |
Valve stem |
|
| ||
|
|
| ||
Screws and Washers |
|
|
| |
removed from valve bracket |
|
|
| |
Sideburner | Sideburner control knob | |||
| ||||
| valve bracket | |||
10
Insert sideburner burner into left shelf.The stud on bottom of burner fits into rear small hole in sideburner drip pan on shelf, shown A. Secure burner to sideburner drip pan with one Wing nut, shown B.Make sure burner tube engages sideburner valve, shown C.
B
Wing nut
C
Burner tube
Wing nut
Qty.1
Sideburner burner
Sideburner drip pan
Sideburner drip pan 
A
21
