9
First, remove the two screws and lock washers factory attached to the sideburner valve bracket.
Position sideburner valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes on valve bracket with left and right holes on fascia. Secure using screws and lock washers that were removed from bracket, shown A.
Place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on fascia. Attach sideburner bezel to fascia using two
Press sideburner control knob onto valve stem, shown B.
A
Screws and washers
removed from valve bracket
Sideburner shelf
Note: Use left and right holes on fascia to attach valve bracket
Sideburner shelf Fascia
Valve bracket
B
Note: Make sure set the Bezel with longer slot at the top.
Control Knob | Note: Use upper and lower holes |
| on fascia to attach bezel |
valve stem
|
|
screw | 4mm Lock |
| washer |
| Sideburner Bezel |
18
