Char-Broil 463262811 manual Front, Assembly

ASSEMBLY

1

Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.

Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front. After all 4 casters are secure remove the Bent U Pin and save for future maintenance.

Locking caster

Non-lock caster

A

Bent U pin

Bottom shelf

Front

Rear

2	Attach side panels to bottom shelf using three
	1/4-20x1/2”screws, 7mm lock washers, and

7mm flat washers per panel.

IMPORTANT: Panel with large hole must be on Right side of bottom shelf.

Left side panel

Make sure side panels are pushed as far to the rear of bottom shelf as possible before fully tightening screws.

1/4-20x1/2” screw

7mm lock washer

7mm flat washer

Right side panel (with large hole)

Front

Magnet

14