Char-Broil 463262811 manual Handle appearance may differ from actual part

118a Insert sideburner burner into left shelf. The stud on bottom of burner fits into rear small hole in sideburner drip pan on shelf, shown A. Secure burner to sideburner drip pan with one Wing nut, shown B. Under sideburner shelf, attach sideburner ignitor wire to electrode. Make sure burner tube engages sideburner valve, shown C.

B

Wing nut

C

tube burner

electrode

sideburner drip pan

A

sideburner burner

valve

sideburner drip pan

	ignitor wire
	Place sideburner lid onto left shelf and align holes in back of lid with hinge holes. Secure lid to hinges using four #10-24x3/8”
12
	screws, 5mm flat washers, 5mm lock washers, and #10-24hex nuts.
	Handle appearance may differ from actual part.
		NOTE: Fully secure one hinge
		with screws, washers and nuts,
		then secure remaining hinge.

Sideburner lid

#10-24x3/8” screw

#10-24 hex nut

5mm lock washer

5mm flat washer

20