14
Inside of cart, connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the electronic ignition module. Total (5) connections. Connect the two wires {(a) and (b)} from the switch wiring harness into the back of the electronic ignition module. Total (2) connections, shown A.
Release the cap and nut from electronic ignition module. Attach electronic ignition module and heat shield to the cart right side panel with the nut, shown B.
Insert AA battery into ignition module, negative
A
3 | (a) | wire |
| ||
4 |
| 1 |
5 |
| |
(b) | 2 | |
|
|
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown as A, B.
B
Electronic |
|
ignition module | Right side panel |
|
Heat shield | Nut |
C
-
+
AA battery Cap
Under sideburner shelf, attach sideburner ignitor wire to electrode, shown A. Place sideburner grate onto sideburner shelf, | |
15 aligning grate legs with holes in shelf, shown B. |
|
A |
|
Electrode | B |
| |
Sideburner grate
Sideburner Ignitor Wire
23
