18
Insert tank wire into left legs. Rotate tank wire inward toward cart.
Tank wire
19
Tank collar opening must face to front of grill (A). Set bottom of tank into notches of tank bracket (B). Lean tank inward and engage tank collar with tank wire (C).
LP CYLINDER IS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to grill and regulator (see Use & Care section). Once cylinder has been filled and leak checked, place cylinder into notches in tank support bracket. Make
sure cylinder valve is facing front of grill. See Use & Care section of this manual to perform the “Burner Flame Check” and for important safety instructions before using.
Tank Collar | Curved portion |
| of tank wire |
| C |
A
Correctly Installed LP cylinder.
B
Regulator 
Tank
LP Cylinder
(not included)
Always keep LP cylinders in upright position during use, transport, and storage.
CAUTION
Cylinder valve must face to front of cart once tank is attached. Failure to install cylinder correctly may allow gas hose to be damaged in operation, resulting in the risk of fire.
27
