7 ASSEMBLY GUIDE |
| GRILL FINAL Assembly | ||||
|
|
| Part | Qty. | Part | Qty. |
|
|
| ||||
|
| C1 | – Side Shelf, RH | 1 | C7 – Ignitor Wire | 1 |
|
| C2 | – Side Shelf, LH | 1 |
|
|
|
| C3 | – Trough | 1 |
|
|
|
| C4 | – Cooking Grate | 1 |
|
|
|
| C5 | – Regulator Control Valve | 1 |
|
|
|
| C6 | – Cooler Bags/Coolers | 2 |
|
|
Step 1 - Install the Regulator Control Valve (C5) by first sliding the regulator lock toward the rear of the grill, inserting the Regulator Control Valve fully into the exposed burner tube, and then releasing the regulator lock. Next, press the end of the Ignitor Wire (C7) onto the push button ignitor as shown.
Regulator Lock
Regulator
C5
2.Insert Regulator fully into burner tube.
3.Release lock.
C7
Step 2 - Place the Side Shelves RH and LH (C1 & C2) into position by aligning the mounting rods with the bushing located in the firebox bottom. Press the shelves into place firmly. Place the Trough (C3) into the Firebox Bottom, then place the Cooking Gate (C4) into the Trough. The Cooler Bags (C6) rest on the bottom shelf of the grill cart, as shown.
C4
C2 | C3 |
C1
C6
C6
