2.1 Fitting the Reflectors and Safety Flag
When using the transporter as a bicycle trailer you must attach the front, back and spoke reflectors as well as the safety flag.
Spoked wheels on the Corsaire XL, Captain XL, Cougar and CX
Position the spoke reflector between |
| Guide the plastic holder with its slot |
two outer spokes and an inner spoke |
| over the inner spoke into the hole of |
in such a way that the inner spoke lies |
| the reflector and secure by tightening |
in the guide slot of the reflector. |
| it a quarter turn using a screwdriver. |
|
|
|
|
|
|
Plastic wheel on the Cabriolet, Comfort and Cheetah. Screw two reflectors onto each wheel at the corresponding brackets.
Fit two reflectors on each wheel (as shown to the right and left of the valve).
For fixing the reflectors to the passen- ger compartment you need a Philips screwdriver.
Fit the red reflectors in the rear | Fit the white reflectors in the front |
grommets. | grommets. |
Assemble the flag, push it on the left hand side through the loop of the weather cover and insert it in the corresponding flap (in countries where the traffic drives on the left the safety flag must be inserted in the flap on the right hand side). For the Cheetah, Cougar and CX the safety flag is inserted in a hole in the plastic cap of the rear frame tube (not illustrated).
16
