OPERATING INSTRUCTIONS
Control Panel
Please be aware that after 12 seconds of no control panel activity the LEDs in the display will turn off. Press any button to initialize.
On the control panel you can set the DMX address, set the fixture to Master/Slave mode, reset the fixture and change fixture personality trait.
[MODE] Confirms selection [ENTER] Access to main menu
[Up] Toggle menu items in a forward direction [Down] Toggle menu items in a reverse direction
Control Panel Functions
FUNCTION
PAN
Tilt
OPTIONS
NO/YES
NO/YES
Pan Invert Tilt Invert
NOTES
Addr rESt
COLI
RUN
LAMP
VEr
HEAt
LA.Er
A001
YES
NO/YES
dn.Co.
Pr6.1
Pr6.2
SLAE
Sou.1
Sou.2
ON
OFF 1.X Status Status
DMX Channel Address
Fixture reset
Linear progression of color wheel (split colors)
Automatic Program 1 (when mounted upside down) Automatic Program 2 (when floor positioned) Slave Mode
Music Program 1 (when mounted upside down) Music Program 2 (when floor positioned)
Lamp on
Lamp off
Software version
Too hot to strike or no lamp
Lamp error
Applying changes to Functions (Quick Instructions)
Unless other wise stated changes in the control panel can be applied in the following manner.
1.Press [MODE] button repeatedly until the display reads the menu function you wish to change as illustrated in the table above in section “Control Panel Functions”
2.Press the [ENTER] key to confirm the selection
3.Press the [Up] or [Down] button to toggle between the options available for that particular menu function.
4.Press the [Enter] button to store your selection.
9 |