Chauvet 3.1 user manual Configuration Standalone, Sound-Active Mode Automatic Programs

Configuration

(Standalone)

Sound-Active Mode

Automatic

Programs

Set the product in one of the standalone modes to control without a DMX controller.

1.Connect the product to a suitable power outlet.

2.Turn the product on.

Never connect a product that is operating in any standalone mode (either Static, Automatic, or Sound) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.

To enable the Sound-Active mode, do the following:

1.Press <MENU repeatedly until SNd shows on the display.

2.Press <ENTER>.

The product will only respond to low frequencies of music (bass and drums).

To enable the automatic programs, follow the instructions below:

1.Press <MENU> repeatedly until P--shows on the display.

2.Press <ENTER>.

3.Use <UP> or <DOWN> select an automatic program from P 1–P 9.

4.Press <MENU> until S--shows on the display.

5.Press <UP> or <DOWN> to adjust the speed of the automatic programs (S 1–S100).

6.Press <ENTER>.

Minisphere™ User Manual (Rev. 1) Page 11 of 15