Chauvet 648 user manual Operation, Control Panel To, Menu Map, Manual Control, Sound-Active

4. OPERATION

Control Panel To		access the control panel			functions, use		the four buttons located underneath the
Operation panel.display. Please refer to the Product Overview to see the button locations on the control
		Button					Function
		<MENU>		Press to find an operation mode or to back out of the current menu
				option
		<UP>		Press to scroll up the list of options or to find a higher value
		<DOWN>		Press to scroll down the list of options or to find a lower value
		<ENTER>		Press to activate a menu option or a selected value
Menu Map
		Mode		Programming Steps			Description
		DMX Mode	512			d__1-d512	Selects the DMX starting address
	Manual Control			U--		d__0-d100	Controls manual dimmer
						S__0-S100	Controls manual strobe speed (0-30 Hz)
	Sound-Active			SUND			Turns on Sound-Active mode
Configuration Set the product in DMX mode to control with a DMX controller.
(DMX) 1.		Connect the product to a suitable power outlet.
2.		Turn the product on.

3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.

Starting Address When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels.

The Impulse™ 648 uses up to 2 DMX channels in its 2-channel DMX mode, which defines the highest configurable address to 511.

If you are not familiar with the DMX protocol, you may refer to the DMX Primer section in the Technical Information chapter.

To select the starting address, do the following:

1.Press <MENU> repeatedly until 512 shows on the display.

2.Press <ENTER>.

3.Use <UP> or <DOWN> to select the starting address.

4.Press <ENTER>.

Impulse™ 648 User Manual Rev. 6 Page 11 of 21