JVC LT-Z32SX4B manual Using the “Multi-picture” function, To cancel the “Freeze” function

Remote control buttons and functions

ENGLISH

To cancel the “Freeze” function:

Press the fbutton, the 6 pbuttons or the number buttons.

•The “Freeze” function does not work while a sub-picture is displayed.

•The still picture cannot be output from the TV.

•The “Freeze” function does not work for picture of PC signal.

Using the “Multi-picture” function

1Set the PIP/TV/DVD switch to the PIP position

When using the “Multi-picture” function, set the PIP/TV/DVD switch to the PIP position.

2Press the Xbutton

The “Multi-picture” menu appears.

1 2 12

D0101

3Press the 5 buttons to choose the number of screens and then press the a button

1Choose to return to one screen.

D0102

2Choose to change to 2-pictures multi.

D0103

12Choose to change to 12-pictures multi.

D0104

12-pictures multi:

Still pictures

Moving picture

D0058

•When set to 2-pictures multi, you can view a TV picture and a picture from an external device. You cannot view a TV picture on more than one screen at the same time.

•When 12-pictures multi is set, pictures from external devices are not displayed.

•When set to 2-pictures multi, the main- picture can be changed by pressing the 6pbuttons. The sub- picture screen can be changed by pressing the 6buttons.

When set to 12-pictures multi and there are more than 12 pictures, the next or previous 12 screens can be displayed by pressing the

6pbuttons.

•When set to 2-pictures multi, the main- picture sound from the TV speaker can be changed to the sub-picture sound by pressing the cbutton when the PIP/ TV/DVD switch is set to the PIP position. (The speaker mark moves from the main-picture to the sub- picture.)

The sound changes to the main-picture sound if the cbutton is pressed again. When the headphones are connected, you can listen to the sound from the side at which the headphones mark is displayed. No sound comes from the TV speaker.

2-pictures multi:

Main-	Sub-
picture	picture

D0056

With 1125i and 750p signals, the screen is split into two as shown below.

Main-
picture		Sub-
		picture
	D1056

•The pictures from VIDEO-1 (or VIDEO-3) cannot be displayed in the sub-picture when the VIDEO-1 SETTING (or VIDEO-3 SETTING) is set to COMPONENT (see page 38).

•The “Multi-picture” function does not work for a PC signal.

•When set to 12-pictures multi, press the 7buttons to choose the screen you want to view and the press the a button to display that picture on the whole screen.

16