JVC LT-Z32SX4B manual Additional preparation, Connecting external equipment, „ Connecting the PC

Additional preparation

Connecting external equipment

Connect the equipment to the TV, making the correct rear panel and front panel connections.

Before connecting anything:

•Read the manuals that came with the equipment.

Depending on the equipment, the connection method may be different from the diagram. Also, the equipment settings may need to change depending on the connection method.

•Turn off all the equipment including the TV.

•The “Specifications” on page 47 give the details of the VIDEO terminals. If you are connecting equipment not listed in the following connection diagram, see the table to choose the best VIDEO terminal.

•Connecting cables are not supplied.

•If the VCR’s audio output is in mono, connect the VCR’s AUDIO OUT (audio output) terminal and the TV’s VIDEO-3 AUDIO L terminal with an audio cable.

•Use the supplied cable to connect the component device to the VIDEO-1 COMPONENT Y Pb/Cb Pr/Cr terminal.

„Connecting the PC

1 VCR (composite signal)

2 VCR (S-VIDEO signal; Y/C)

3 VCR for recording (composite signal)

4 DVD player (composite signal)

5 DVD player (S-VIDEO signal; Y/C)

6 TV game (composite signal)

7 TV game (S-VIDEO signal; Y/C)

8Headphones

9Camcorder (composite signal/S-VIDEO

signal; Y/C)

0DVD player (component video signals; Y, Pb/Cb, Pr/Cr)

-Video cable = Audio cable ~ S-VIDEO cable

! Component cable

ENGLISH

For details, see “Connecting to the computer” on page 40.

41